Inch Duplex Type F Thin Section Bearings

Loading Condition
Radial	Axial	Moment	Reversing Axial	Combined Radial Thrust
Very Good	Very Good	Very Good	Very Good	Good

Nylon; circular pocket separator standard

3/32" balls

Load capacities are not additive
The maximum shaft or housing fillet radius that the bearing corners will clear for this series is 0.015"
Race Width Tolerance: +0.000 -0.010"

SAA SERIES 3/16" x 3/16"
SILVERTHIN PART NUMBER	DIMENSION IN INCHES				CAPACITIES IN POUNDS / IN-LBS						APPROX WEIGHT POUNDS
	BORE	OUTSIDE DIA	LAND DIA	LAND DIA	RADIAL		THRUST		MOMENT
	B	D	L₁	L₂	STATIC	DYN	STATIC	DYN	STATIC	DYN
SAA10FG0	1.000	1.375	1.140	1.235	550	310	970	450	165	95	0.05
SAA15FG0	1.500	1.875	1.640	1.735	780	390	1,380	560	375	185	0.08
SAA17FG0	1.750	2.125	1.890	1.985	860	400	1,520	600	490	235	0.09

Brass; one piece pocket separator standard

1/8" balls

Load capacities are not additive
The maximum shaft or housing fillet radius that the bearing corners will clear for this series is 0.025"
Race Width Tolerance: +0.000 -0.010"

SA SERIES 1/4" x 1/4"
SILVERTHIN PART NUMBER	DIMENSION IN INCHES				CAPACITIES IN POUNDS / IN-LBS						APPROX WEIGHT POUNDS
	BORE	OUTSIDE DIA	LAND DIA	LAND DIA	RADIAL		THRUST		MOMENT
	B	D	L₁	L₂	STATIC	DYN	STATIC	DYN	STATIC	DYN
SA020FR0	2.000	2.500	2.186	2.314	1,280	650	2,280	960	825	425	0.20
SA025FR0	2.500	3.000	2.686	2.814	1,560	740	2,780	1,100	1,290	615	0.26
SA030FR0	3.000	3.500	3.186	3.314	1,850	820	3,290	1,230	1,850	825	0.30
SA035FR0	3.500	4.000	3.686	3.814	2,120	890	3,790	1,350	2,515	1,060	0.36
SA040FR0	4.000	4.500	4.186	4.314	2,420	960	4,300	1,470	3,280	1,315	0.38
SA042FR0	4.250	4.750	4.436	4.564	2,560	990	4,550	1,530	3,705	1,445	0.40
SA045FR0	4.500	5.000	4.686	4.814	2,690	1,030	4,810	1,580	4,150	1,585	0.44
SA047FR0	4.750	5.250	4.936	5.064	2,840	1,060	5,060	1,640	4,620	1,730	0.46
SA050FR0	5.000	5.500	5.186	5.314	2,990	1,090	5,310	1,690	5,115	1,880	0.48
SA055FR0	5.500	6.000	5.686	5.814	3,280	1,160	5,820	1,800	6,185	2,195	0.50
SA060FR0	6.000	6.500	6.186	6.314	3,550	1,210	6,320	1,900	7,355	2,525	0.56
SA065FR0	6.500	7.000	6.686	6.814	3,850	1,280	6,830	2,000	8,630	2,870	0.60
SA070FR0	7.000	7.500	7.186	7.314	4,120	1,340	7,340	2,100	10,000	3,240	0.62
SA075FR0	7.500	8.000	7.686	7.814	4,420	1,380	7,840	2,190	11,475	3,620	0.68
SA080FR0	8.000	8.500	8.186	8.314	4,690	1,440	8,350	2,280	13,050	4,020	0.76
SA090FR0	9.000	9.500	9.186	9.314	5,260	1,550	9,360	2,470	16,505	4,860	0.88
SA100FR0	10.000	10.500	10.186	10.314	5,830	1,640	10,370	2,640	20,360	5,755	1.00
SA110FR0	11.000	11.500	11.186	11.314	6,400	1,730	11,380	2,810	24,625	6,705	1.04
SA120FR0	12.000	12.500	12.186	12.314	6,970	1,830	12,390	2,970	29,290	7,700	1.12

Brass; one piece pocket separator standard

5/32" balls

Load capacities are not additive
The maximum shaft or housing fillet radius that the bearing corners will clear for this series is 0.040"
Race Width Tolerance: +0.000 -0.010"

SB SERIES 5/16" x 5/16"
SILVERTHIN PART NUMBER	DIMENSION IN INCHES				CAPACITIES IN POUNDS / IN-LBS						APPROX WEIGHT POUNDS
	BORE	OUTSIDE DIA	LAND DIA	LAND DIA	RADIAL		THRUST		MOMENT
	B	D	L₁	L₂	STATIC	DYN	STATIC	DYN	STATIC	DYN
SB020FR0	2.000	2.625	2.231	2.393	1,770	970	3,150	1,380	1,095	600	0.32
SB025FR0	2.500	3.125	2.731	2.893	2,170	1,090	3,860	1,590	1,730	885	0.38
SB030FR0	3.000	3.625	3.231	3.393	2,510	1,190	4,470	1,750	2,495	1,195	0.48
SB035FR0	3.500	4.125	3.731	3.893	2,900	1,300	5,180	1,930	3,400	1,530	0.58
SB040FR0	4.000	4.625	4.231	4.393	3,310	1,400	5,890	2,100	4,440	1,895	0.60
SB042FR0	4.250	4.875	4.481	4.643	3,490	1,440	6,200	2,170	5,010	2,090	0.62
SB045FR0	4.500	5.125	4.731	4.893	3,650	1,480	6,500	2,240	5,615	2,290	0.66
SB047FR0	4.750	5.375	4.981	5.143	3,880	1,540	6,910	2,340	6,250	2,495	0.68
SB050FR0	5.000	5.625	5.231	5.393	4,060	1,580	7,210	2,410	6,925	2,710	0.76
SB055FR0	5.500	6.125	5.731	5.893	4,450	1,680	7,920	2,560	8,370	3,150	0.82
SB060FR0	6.000	6.625	6.231	6.393	4,850	1,770	8,630	2,710	9,950	3,620	0.88
SB065FR0	6.500	7.125	6.731	6.893	5,200	1,830	9,240	2,840	11,665	4,115	0.94
SB070FR0	7.000	7.625	7.231	7.393	5,600	1,920	9,960	2,980	13,520	4,630	1.00
SB075FR0	7.500	8.125	7.731	7.893	6,010	2,000	10,670	3,120	15,510	5,170	1.06
SB080FR0	8.000	8.625	8.231	8.393	6,400	2,080	11,380	3,260	17,635	5,735	1.14
SB090FR0	9.000	9.625	9.231	9.393	7,150	2,220	12,700	3,510	22,290	6,925	1.32
SB100FR0	10.000	10.625	10.231	10.393	7,940	2,370	14,120	3,760	27,495	8,205	1.46
SB110FR0	11.000	11.625	11.231	11.393	8,690	2,500	15,440	4,000	33,245	9,560	1.50
SB120FR0	12.000	12.625	12.231	12.393	9,490	2,640	16,860	4,240	39,540	10,995	1.66
SB140FR0	14.000	14.625	14.231	14.393	10,980	2,860	19,500	4,670	53,775	14,070	2.10
SB160FR0	16.000	16.625	16.231	16.393	12,520	3,090	22,250	5,100	70,200	17,400	2.40
SB180FR0	18.000	18.625	18.231	18.393	14,070	3,310	24,990	5,510	88,825	20,950	2.70
SB200FR0	20.000	20.625	20.231	20.393	15,610	3,510	27,730	5,900	109,655	24,680	3.00

Brass; one piece pocket separator standard

3/16" balls

Load capacities are not additive
The maximum shaft or housing fillet radius that the bearing corners will clear for this series is 0.040"
Race Width Tolerance: +0.000 -0.010"

SC SERIES 3/8" x 3/8"
SILVERTHIN PART NUMBER	DIMENSION IN INCHES				CAPACITIES IN POUNDS / IN-LBS						APPROX WEIGHT POUNDS
	BORE	OUTSIDE DIA	LAND DIA	LAND DIA	RADIAL		THRUST		MOMENT
	B	D	L₁	L₂	STATIC	DYN	STATIC	DYN	STATIC	DYN
SC040FR0	4.000	4.750	4.277	4.473	4,140	1,870	7,360	2,770	5,495	2,470	0.90
SC042FR0	4.250	5.000	4.527	4.723	4,400	1,940	7,820	2,880	6,210	2,735	0.94
SC045FR0	4.500	5.250	4.777	4.973	4,640	2,000	8,270	2,990	6,965	3,005	0.96
SC047FR0	4.750	5.500	5.027	5.223	4,900	2,070	8,720	3,100	7,765	3,290	1.00
SC050FR0	5.000	5.750	5.277	5.473	5,160	2,130	9,170	3,200	8,610	3,575	1.16
SC055FR0	5.500	6.250	5.777	5.973	5,590	2,230	9,920	3,370	10,420	4,175	1.18
SC060FR0	6.000	6.750	6.277	6.473	6,090	2,350	10,820	3,580	12,405	4,805	1.26
SC065FR0	6.500	7.250	6.777	6.973	6,590	2,470	11,720	3,770	14,560	5,465	1.36
SC070FR0	7.000	7.750	7.277	7.473	7,020	2,550	12,470	3,930	16,885	6,155	1.46
SC075FR0	7.500	8.250	7.777	7.973	7,520	2,660	13,380	4,120	19,380	6,870	1.56
SC080FR0	8.000	8.750	8.277	8.473	8,040	2,770	14,280	4,300	22,050	7,620	1.68
SC090FR0	9.000	9.750	9.277	9.473	8,970	2,950	15,930	4,630	27,895	9,195	1.88
SC100FR0	10.000	10.750	10.277	10.473	9,970	3,150	17,730	4,970	34,425	10,875	2.12
SC110FR0	11.000	11.750	11.277	11.473	10,920	3,320	19,390	5,280	41,635	12,660	2.32
SC120FR0	12.000	12.750	12.277	12.473	11,840	3,480	21,040	5,570	49,530	14,545	2.50
SC140FR0	14.000	14.750	14.277	14.473	13,790	3,810	24,500	6,170	67,370	18,595	3.04
SC160FR0	16.000	16.750	16.277	16.473	15,730	4,110	27,950	6,730	87,935	23,000	3.46
SC180FR0	18.000	18.750	18.277	18.473	17,680	4,390	31,410	7,280	111,230	27,730	3.88
SC200FR0	20.000	20.750	20.277	20.473	19,540	4,650	34,720	7,780	137,255	32,745	4.32
SC250FR0	25.000	25.750	25.277	25.473	24,210	5,250	43,280	9,010	214,240	46,360	5.38
SC300FR0	30.000	30.750	30.277	30.473	29,180	5,780	51,850	10,160	308,260	61,115	6.42

Brass; one piece pocket separator standard

1/4" balls

Load capacities are not additive
The maximum shaft or housing fillet radius that the bearing corners will clear for this series is 0.060"
Race Width Tolerance: +0.000 -0.010"

SD SERIES 1/2" x 1/2"
SILVERTHIN PART NUMBER	DIMENSION IN INCHES				CAPACITIES IN POUNDS / IN-LBS						APPROX WEIGHT POUNDS
	BORE	OUTSIDE DIA	LAND DIA	LAND DIA	RADIAL		THRUST		MOMENT
	B	D	L₁	L₂	STATIC	DYN	STATIC	DYN	STATIC	DYN
SD040FR0	4.000	5.000	4.370	4.630	5,760	2,950	10,260	4,260	7,455	3,795	1.56
SD042FR0	4.250	5.250	4.620	4.880	6,090	3,040	10,830	4,420	8,415	4,200	1.66
SD045FR0	4.500	5.500	4.870	5.130	6,410	3,130	11,400	4,570	9,425	4,610	1.76
SD047FR0	4.750	5.750	5.120	5.380	6,740	3,220	11,970	4,720	10,495	5,035	1.88
SD050FR0	5.000	6.000	5.370	5.630	7,050	3,310	12,540	4,870	11,620	5,475	2.00
SD055FR0	5.500	6.500	5.870	6.130	7,700	3,480	13,680	5,160	14,045	6,380	2.12
SD060FR0	6.000	7.000	6.370	6.630	8,330	3,640	14,820	5,440	16,700	7,335	2.32
SD065FR0	6.500	7.500	6.870	7.130	8,980	3,810	15,960	5,720	19,580	8,335	2.44
SD070FR0	7.000	8.000	7.370	7.630	9,620	3,960	17,100	5,990	22,690	9,375	2.62
SD075FR0	7.500	8.500	7.870	8.130	10,270	4,110	18,240	6,250	26,025	10,460	2.82
SD080FR0	8.000	9.000	8.370	8.630	10,900	4,260	19,380	6,510	29,590	11,585	3.06
SD090FR0	9.000	10.000	9.370	9.630	12,180	4,550	21,660	7,010	37,400	13,965	3.44
SD100FR0	10.000	11.000	10.370	10.630	13,470	4,820	23,940	7,500	46,125	16,505	3.76
SD110FR0	11.000	12.000	11.370	11.630	14,750	5,090	26,220	7,960	55,765	19,205	4.12
SD120FR0	12.000	13.000	12.370	12.630	16,030	5,340	28,500	8,420	66,315	22,050	4.50
SD140FR0	14.000	15.000	14.370	14.630	18,600	5,810	33,060	9,290	90,150	28,170	5.46
SD160FR0	16.000	17.000	16.370	16.630	21,170	6,260	37,620	10,130	117,630	34,815	6.20
SD180FR0	18.000	19.000	18.370	18.630	23,740	6,680	42,180	10,930	148,760	41,950	6.96
SD200FR0	20.000	21.000	20.370	20.630	26,300	7,070	46,740	11,710	183,540	49,520	7.70
SD250FR0	25.000	26.000	25.370	25.630	27,590	7,260	49,020	12,085	286,445	70,060	9.58
SD300FR0	30.000	31.000	30.370	30.630	39,140	8,760	69,540	15,260	412,150	92,340	11.46

Brass; one piece pocket separator standard

3/8" balls

Load capacities are not additive
The maximum shaft or housing fillet radius that the bearing corners will clear for this series is 0.080"
Race Width Tolerance: +0.000 -0.010"

SF SERIES 3/4" x 3/4"
SILVERTHIN PART NUMBER	DIMENSION IN INCHES				CAPACITIES IN POUNDS / IN-LBS						APPROX WEIGHT POUNDS
	BORE	OUTSIDE DIA	LAND DIA	LAND DIA	RADIAL		THRUST		MOMENT
	B	D	L₁	L₂	STATIC	DYN	STATIC	DYN	STATIC	DYN
SF040FR0	4.000	5.500	4.555	4.945	10,310	6,060	18,340	8,420	17,880	11,660	3.80
SF042FR0	4.250	5.750	4.805	5.195	10,720	6,180	19,050	8,630	20,215	12,955	4.00
SF045FR0	4.500	6.000	5.060	5.445	11,520	6,440	20,460	9,050	22,680	14,285	4.20
SF047FR0	4.750	6.250	5.305	5.695	11,910	6,550	21,160	9,260	25,285	15,645	4.40
SF050FR0	5.000	6.500	5.555	5.945	12,300	6,660	21,870	9,460	28,025	17,040	4.60
SF055FR0	5.500	7.000	6.055	6.445	13,500	7,020	23,980	10,060	33,915	19,920	5.00
SF060FR0	6.000	7.500	6.555	6.945	14,690	7,360	26,100	10,650	40,355	22,920	5.40
SF065FR0	6.500	8.000	7.055	7.445	15,870	7,690	28,220	11,220	47,345	26,050	5.80
SF070FR0	7.000	8.500	7.555	7.945	17,070	8,010	30,330	11,770	54,875	29,300	6.40
SF075FR0	7.500	9.000	8.055	8.445	17,870	8,200	31,740	12,130	62,960	32,670	6.80
SF080FR0	8.000	9.500	8.555	8.945	19,060	8,510	33,860	12,670	71,585	36,155	7.00
SF090FR0	9.000	10.500	9.555	9.945	21,430	9,110	38,090	13,700	90,485	43,480	7.80
SF100FR0	10.000	11.500	10.555	10.945	23,430	9,570	41,620	14,530	111,570	51,260	8.60
SF110FR0	11.000	12.500	11.555	11.945	25,800	10,110	45,850	15,500	134,845	59,480	9.60
SF120FR0	12.000	13.500	12.555	12.945	27,780	10,530	49,380	16,290	160,310	68,130	10.40
SF140FR0	14.000	15.500	14.555	14.945	32,150	11,440	57,140	17,950	217,805	86,660	12.00
SF160FR0	16.000	17.500	16.555	16.945	36,530	12,290	64,890	19,540	284,055	106,755	14.20
SF180FR0	18.000	19.500	18.555	18.945	41,290	13,170	73,360	21,210	359,065	128,305	15.80
SF200FR0	20.000	21.500	20.555	20.945	45,660	13,910	81,120	22,680	442,825	151,210	17.80
SF250FR0	25.000	26.500	25.555	25.945	56,380	15,570	100,200	26,100	690,530	213,725	21.80
SF300FR0	30.000	31.500	30.555	30.945	67,500	17,110	119,900	29,430	992,955	282,455	26.00
SF350FR0	35.000	36.500	35.555	35.945	78,610	18,490	139,700	32,580	1,350,100	355,795	30.20

Brass; one piece pocket separator standard

1/2" balls

Load capacities are not additive
The maximum shaft or housing fillet radius that the bearing corners will clear for this series is 0.080"
Race Width Tolerance: +0.000 -0.010"

SG SERIES 1" x 1"
SILVERTHIN PART NUMBER	DIMENSION IN INCHES				CAPACITIES IN POUNDS / IN-LBS						APPROX WEIGHT POUNDS
	BORE	OUTSIDE DIA	LAND DIA	LAND DIA	RADIAL		THRUST		MOMENT
	B	D	L₁	L₂	STATIC	DYN	STATIC	DYN	STATIC	DYN
SG040FR0	4.000	6.000	4.742	5.258	15,400	10,200	27,360	13,630	17,880	10,705	7.20
SG042FR0	4.250	6.250	4.992	5.508	16,160	10,460	28,730	14,090	20,210	12,275	7.60
SG045FR0	4.500	6.500	5.242	5.758	16,940	10,660	30,100	14,530	22,680	13,865	8.00
SG047FR0	4.750	6.750	5.492	6.008	17,710	10,960	31,460	14,970	25,285	15,475	8.20
SG050FR0	5.000	7.000	5.742	6.258	18,470	11,200	32,830	15,400	28,025	17,100	8.60
SG055FR0	5.500	7.500	6.242	6.758	20,020	11,680	35,570	16,240	33,915	20,420	9.40
SG060FR0	6.000	8.000	6.742	7.258	21,560	12,150	38,300	17,060	40,355	23,815	10.20
SG065FR0	6.500	8.500	7.242	7.758	23,100	12,610	41,040	17,870	47,345	27,290	10.80
SG070FR0	7.000	9.000	7.742	8.258	24,630	13,050	43,780	18,650	54,875	30,845	11.60
SG075FR0	7.500	9.500	8.242	8.758	26,170	13,490	46,510	19,420	62,960	34,480	12.20
SG080FR0	8.000	10.000	8.742	9.258	27,720	13,910	49,250	20,180	71,585	38,190	13.00
SG090FR0	9.000	11.000	9.742	10.258	30,810	14,740	54,720	21,640	90,485	45,855	14.40
SG100FR0	10.000	12.000	10.742	11.258	33,880	15,530	60,190	23,060	111,570	53,840	15.80
SG110FR0	11.000	13.000	11.742	12.258	36,960	16,290	65,660	24,440	134,845	62,140	17.20
SG120FR0	12.000	14.000	12.742	13.258	40,040	17,030	71,140	25,780	160,310	70,755	18.60
SG140FR0	14.000	16.000	14.742	15.258	46,190	18,420	82,080	28,360	217,805	88,945	21.60
SG160FR0	16.000	18.000	16.742	17.258	52,350	19,720	93,020	30,830	284,055	108,400	24.60
SG180FR0	18.000	20.000	18.742	19.258	58,530	20,960	104,000	33,200	359,065	129,130	27.40
SG200FR0	20.000	22.000	20.742	21.258	64,690	22,110	114,900	35,490	442,825	151,130	31.60
SG250FR0	25.000	27.000	25.742	26.258	80,080	24,760	142,300	40,920	690,530	211,685	39.00
SG300FR0	30.000	32.000	30.742	31.258	95,480	27,110	169,600	46,020	992,955	280,175	46.60
SG350FR0	35.000	37.000	35.742	36.258	110,890	29,210	197,000	50,840	1,350,100	356,605	54.20

Inch Duplex Type F Thin Section Bearings

SAA SERIES 3/16" x 3/16"

SA SERIES 1/4" x 1/4"

SB SERIES 5/16" x 5/16"

SC SERIES 3/8" x 3/8"

SD SERIES 1/2" x 1/2"

SF SERIES 3/4" x 3/4"

SG SERIES 1" x 1"

Part Number Cross Reference

OUR SERVICES

SCHEDULE TIME WITH OUR APPLICATION ENGINEERS

SILVERTHIN TECHNICAL DATA SHEET GENERATOR