Inch Duplex Type B Thin Section Bearings

Loading Condition
Radial	Axial	Moment	Reversing Axial	Combined Radial Thrust
Very Good	Very Good	Very Good	Very Good	Good

Nylon; circular pocket separator standard

3/32" balls

Load capacities are not additive
The maximum shaft or housing fillet radius that the bearing corners will clear for this series is 0.015"
Race Width Tolerance: +0.000 -0.010"

SAA SERIES 3/16" x 3/16"
SILVERTHIN PART NUMBER	DIMENSION IN INCHES				CAPACITIES IN POUNDS / IN-LBS						APPROX WEIGHT POUNDS
	BORE	OUTSIDE DIA	LAND DIA	LAND DIA	RADIAL		THRUST		MOMENT
	B	D	L₁	L₃	STATIC	DYN	STATIC	DYN	STATIC	DYN
SAA10BG0	1.000	1.375	1.140	1.274	550	310	970	450	295	170	0.05
SAA15BG0	1.500	1.875	1.640	1.774	780	390	1,380	560	555	275	0.08
SAA17BG0	1.750	2.125	1.890	1.990	860	400	1,520	600	690	330	0.09

Brass; one piece pocket separator standard

1/8" balls

Load capacities are not additive
The maximum shaft or housing fillet radius that the bearing corners will clear for this series is 0.025"
Race Width Tolerance: +0.000 -0.010"

SA SERIES 1/4" x 1/4"
SILVERTHIN PART NUMBER	DIMENSION IN INCHES				CAPACITIES IN POUNDS / IN-LBS						APPROX WEIGHT POUNDS
	BORE	OUTSIDE DIA	LAND DIA	LAND DIA	RADIAL		THRUST		MOMENT
	B	D	L₁	L₃	STATIC	DYN	STATIC	DYN	STATIC	DYN
SA020BR0	2.000	2.500	2.186	2.369	1,280	650	2,280	960	1,220	630	0.20
SA025BR0	2.500	3.000	2.686	2.869	1,560	740	2,780	1,100	1,770	845	0.26
SA030BR0	3.000	3.500	3.186	3.367	1,850	820	3,290	1,230	2,420	1,080	0.30
SA035BR0	3.500	4.000	3.686	3.867	2,120	890	3,790	1,350	3,175	1,335	0.36
SA040BR0	4.000	4.500	4.186	4.367	2,420	960	4,300	1,470	4,025	1,610	0.38
SA042BR0	4.250	4.750	4.436	4.615	2,560	990	4,550	1,530	4,490	1,755	0.40
SA045BR0	4.500	5.000	4.686	4.865	2,690	1,030	4,810	1,580	4,980	1,905	0.44
SA047BR0	4.750	5.250	4.936	5.115	2,840	1,060	5,060	1,640	5,495	2,060	0.46
SA050BR0	5.000	5.500	5.186	5.365	2,990	1,090	5,310	1,690	6,035	2,220	0.48
SA055BR0	5.500	6.000	5.686	5.863	3,280	1,160	5,820	1,800	7,195	2,550	0.50
SA060BR0	6.000	6.500	6.186	6.363	3,550	1,210	6,320	1,900	8,450	2,900	0.56
SA065BR0	6.500	7.000	6.686	6.861	3,850	1,280	6,830	2,000	9,810	3,265	0.60
SA070BR0	7.000	7.500	7.186	7.361	4,120	1,340	7,340	2,100	11,270	3,650	0.62
SA075BR0	7.500	8.000	7.686	7.861	4,420	1,380	7,840	2,190	12,835	4,050	0.68
SA080BR0	8.000	8.500	8.186	8.359	4,690	1,440	8,350	2,280	14,495	4,465	0.76
SA090BR0	9.000	9.500	9.186	9.357	5,260	1,550	9,360	2,470	18,125	5,335	0.88
SA100BR0	10.000	10.500	10.186	10.355	5,830	1,640	10,370	2,640	22,155	6,265	1.00
SA110BR0	11.000	11.500	11.186	11.353	6,400	1,730	11,380	2,810	26,595	7,240	1.04
SA120BR0	12.000	12.500	12.186	12.349	6,970	1,830	12,390	2,970	31,440	8,265	1.12

Brass; one piece pocket separator standard

5/32" balls

Load capacities are not additive
The maximum shaft or housing fillet radius that the bearing corners will clear for this series is 0.040"
Race Width Tolerance: +0.000 -0.010"

SB SERIES 5/16" x 5/16"
SILVERTHIN PART NUMBER	DIMENSION IN INCHES				CAPACITIES IN POUNDS / IN-LBS						APPROX WEIGHT POUNDS
	BORE	OUTSIDE DIA	LAND DIA	LAND DIA	RADIAL		THRUST		MOMENT
	B	D	L₁	L₃	STATIC	DYN	STATIC	DYN	STATIC	DYN
SB020BR0	2.000	2.625	2.231	2.464	1,770	970	3,150	1,380	1,775	975	0.32
SB025BR0	2.500	3.125	2.731	2.964	2,170	1,090	3,860	1,590	2,560	1,300	0.38
SB030BR0	3.000	3.625	3.231	3.462	2,510	1,190	4,470	1,750	3,475	1,655	0.48
SB035BR0	3.500	4.125	3.731	3.962	2,900	1,300	5,180	1,930	4,525	2,030	0.58
SB040BR0	4.000	4.625	4.231	4.460	3,310	1,400	5,890	2,100	5,710	2,435	0.60
SB042BR0	4.250	4.875	4.481	4.710	3,490	1,440	6,200	2,170	6,355	2,645	0.62
SB045BR0	4.500	5.125	4.731	4.960	3,650	1,480	6,500	2,240	7,035	2,865	0.66
SB047BR0	4.750	5.375	4.981	5.210	3,880	1,540	6,910	2,340	7,745	3,090	0.68
SB050BR0	5.000	5.625	5.231	5.460	4,060	1,580	7,210	2,410	8,490	3,320	0.76
SB055BR0	5.500	6.125	5.731	5.958	4,450	1,680	7,920	2,560	10,085	3,795	0.82
SB060BR0	6.000	6.625	6.231	6.458	4,850	1,770	8,630	2,710	11,815	4,300	0.88
SB065BR0	6.500	7.125	6.731	6.958	5,200	1,830	9,240	2,840	13,680	4,825	0.94
SB070BR0	7.000	7.625	7.231	7.456	5,600	1,920	9,960	2,980	15,680	5,375	1.00
SB075BR0	7.500	8.125	7.731	7.955	6,010	2,000	10,670	3,120	17,815	5,945	1.06
SB080BR0	8.000	8.625	8.231	8.453	6,400	2,080	11,380	3,260	20,090	6,535	1.14
SB090BR0	9.000	9.625	9.231	9.451	7,150	2,220	12,700	3,510	25,045	7,785	1.32
SB100BR0	10.000	10.625	10.231	10.449	7,940	2,370	14,120	3,760	30,540	9,115	1.46
SB110BR0	11.000	11.625	11.231	11.447	8,690	2,500	15,440	4,000	36,585	10,525	1.50
SB120BR0	12.000	12.625	12.231	12.445	9,490	2,640	16,860	4,240	43,180	12,005	1.66
SB140BR0	14.000	14.625	14.231	14.439	10,980	2,860	19,500	4,670	58,005	15,175	2.10
SB160BR0	16.000	16.625	16.231	16.433	12,520	3,090	22,250	5,100	75,020	18,590	2.40
SB180BR0	18.000	18.625	18.231	18.425	14,070	3,310	24,990	5,510	94,240	22,220	2.70
SB200BR0	20.000	20.625	20.231	20.416	15,610	3,510	27,730	5,900	115,660	26,030	3.00

Brass; one piece pocket separator standard

3/16" balls

Load capacities are not additive
The maximum shaft or housing fillet radius that the bearing corners will clear for this series is 0.040"
Race Width Tolerance: +0.000 -0.010"

SC SERIES 3/8" x 3/8"
SILVERTHIN PART NUMBER	DIMENSION IN INCHES				CAPACITIES IN POUNDS / IN-LBS						APPROX WEIGHT POUNDS
	BORE	OUTSIDE DIA	LAND DIA	LAND DIA	RADIAL		THRUST		MOMENT
	B	D	L₁	L₃	STATIC	DYN	STATIC	DYN	STATIC	DYN
SC040BR0	4.000	4.750	4.277	4.554	4,140	1,870	7,360	2,770	7,410	3,340	0.90
SC042BR0	4.250	5.000	4.527	4.804	4,400	1,940	7,820	2,880	8,240	3,630	0.94
SC045BR0	4.500	5.250	4.777	5.052	4,640	2,000	8,270	2,990	9,105	3,930	0.96
SC047BR0	4.750	5.500	5.027	5.302	4,900	2,070	8,720	3,100	10,020	4,240	1.00
SC050BR0	5.000	5.750	5.277	5.552	5,160	2,130	9,170	3,200	10,975	4,555	1.16
SC055BR0	5.500	6.250	5.777	6.052	5,590	2,230	9,920	3,370	13,010	5,210	1.18
SC060BR0	6.000	6.750	6.277	6.550	6,090	2,350	10,820	3,580	15,220	5,890	1.26
SC065BR0	6.500	7.250	6.777	7.050	6,590	2,470	11,720	3,770	17,595	6,600	1.36
SC070BR0	7.000	7.750	7.277	7.550	7,020	2,550	12,470	3,930	20,145	7,340	1.46
SC075BR0	7.500	8.250	7.777	8.048	7,520	2,660	13,380	4,120	22,865	8,105	1.56
SC080BR0	8.000	8.750	8.277	8.548	8,040	2,770	14,280	4,300	25,755	8,895	1.68
SC090BR0	9.000	9.750	9.277	9.546	8,970	2,950	15,930	4,630	32,050	10,565	1.88
SC100BR0	10.000	10.750	10.277	10.544	9,970	3,150	17,730	4,970	39,020	12,330	2.12
SC110BR0	11.000	11.750	11.277	11.542	10,920	3,320	19,390	5,280	46,680	14,200	2.32
SC120BR0	12.000	12.750	12.277	12.540	11,840	3,480	21,040	5,570	55,020	16,160	2.50
SC140BR0	14.000	14.750	14.277	14.535	13,790	3,810	24,500	6,170	73,745	20,360	3.04
SC160BR0	16.000	16.750	16.277	16.529	15,730	4,110	27,950	6,730	95,200	24,900	3.46
SC180BR0	18.000	18.750	18.277	18.523	17,680	4,390	31,410	7,280	119,380	29,755	3.88
SC200BR0	20.000	20.750	20.277	20.517	19,540	4,650	34,720	7,780	146,290	34,885	4.32
SC250BR0	25.000	25.750	25.277	25.500	24,210	5,250	43,280	9,010	225,490	48,770	5.38
SC300BR0	30.000	30.750	30.277	30.484	29,180	5,780	51,850	10,160	321,730	63,785	6.42

Brass; one piece pocket separator standard

1/4" balls

Load capacities are not additive
The maximum shaft or housing fillet radius that the bearing corners will clear for this series is 0.060"
Race Width Tolerance: +0.000 -0.010"

SD SERIES 1/2" x 1/2"
SILVERTHIN PART NUMBER	DIMENSION IN INCHES				CAPACITIES IN POUNDS / IN-LBS						APPROX WEIGHT POUNDS
	BORE	OUTSIDE DIA	LAND DIA	LAND DIA	RADIAL		THRUST		MOMENT
	B	D	L₁	L₃	STATIC	DYN	STATIC	DYN	STATIC	DYN
SD040BR0	4.000	5.000	4.370	4.741	5,760	2,950	10,260	4,260	11,015	5,620	1.56
SD042BR0	4.250	5.250	4.620	4.991	6,090	3,040	10,830	4,420	12,165	6,075	1.66
SD045BR0	4.500	5.500	4.870	5.241	6,410	3,130	11,400	4,570	13,380	6,545	1.76
SD047BR0	4.750	5.750	5.120	5.490	6,740	3,220	11,970	4,720	14,645	7,020	1.88
SD050BR0	5.000	6.000	5.370	5.740	7,050	3,310	12,540	4,870	15,970	7,510	2.00
SD055BR0	5.500	6.500	5.870	6.238	7,700	3,480	13,680	5,160	18,790	8,525	2.12
SD060BR0	6.000	7.000	6.370	6.738	8,330	3,640	14,820	5,440	21,835	9,580	2.32
SD065BR0	6.500	7.500	6.870	7.236	8,980	3,810	15,960	5,720	25,110	10,675	2.44
SD070BR0	7.000	8.000	7.370	7.736	9,620	3,960	17,100	5,990	28,615	11,815	2.62
SD075BR0	7.500	8.500	7.870	8.236	10,270	4,110	18,240	6,250	32,345	12,995	2.82
SD080BR0	8.000	9.000	8.370	8.734	10,900	4,260	19,380	6,510	36,305	14,215	3.06
SD090BR0	9.000	10.000	9.370	9.732	12,180	4,550	21,660	7,010	44,910	16,770	3.44
SD100BR0	10.000	11.000	10.370	10.732	13,470	4,820	23,940	7,500	54,425	19,485	3.76
SD110BR0	11.000	12.000	11.370	11.730	14,750	5,090	26,220	7,960	64,850	22,340	4.12
SD120BR0	12.000	13.000	12.370	12.728	16,030	5,340	28,500	8,420	76,190	25,345	4.50
SD140BR0	14.000	15.000	14.370	14.724	18,600	5,810	33,060	9,290	101,605	31,755	5.46
SD160BR0	16.000	17.000	16.370	16.718	21,170	6,260	37,620	10,130	130,665	38,670	6.20
SD180BR0	18.000	19.000	18.370	18.712	23,740	6,680	42,180	10,930	163,375	46,055	6.96
SD200BR0	20.000	21.000	20.370	20.705	26,300	7,070	46,740	11,710	199,730	53,860	7.70
SD250BR0	25.000	26.000	25.370	25.688	27,590	7,260	49,020	12,085	306,585	74,940	9.58
SD300BR0	30.000	31.000	30.370	30.672	39,140	8,760	69,540	15,260	436,240	97,735	11.46

Brass; one piece pocket separator standard

3/8" balls

Load capacities are not additive
The maximum shaft or housing fillet radius that the bearing corners will clear for this series is 0.080"
Race Width Tolerance: +0.000 -0.010"

SF SERIES 3/4" x 3/4"
SILVERTHIN PART NUMBER	DIMENSION IN INCHES				CAPACITIES IN POUNDS / IN-LBS						APPROX WEIGHT POUNDS
	BORE	OUTSIDE DIA	LAND DIA	LAND DIA	RADIAL		THRUST		MOMENT
	B	D	L₁	L₃	STATIC	DYN	STATIC	DYN	STATIC	DYN
SF040BR0	4.000	5.500	4.555	5.115	10,310	6,060	18,340	8,420	22,110	12,910	3.80
SF042BR0	4.250	5.750	4.805	5.365	10,720	6,180	19,050	8,630	24,265	13,875	4.00
SF045BR0	4.500	6.000	5.060	5.615	11,520	6,440	20,460	9,050	26,515	14,855	4.20
SF047BR0	4.750	6.250	5.305	5.865	11,910	6,550	21,160	9,260	28,860	15,855	4.40
SF050BR0	5.000	6.500	5.555	6.115	12,300	6,660	21,870	9,460	31,300	16,875	4.60
SF055BR0	5.500	7.000	6.055	6.613	13,500	7,020	23,980	10,060	36,475	18,970	5.00
SF060BR0	6.000	7.500	6.555	7.113	14,690	7,360	26,100	10,650	42,030	21,140	5.40
SF065BR0	6.500	8.000	7.055	7.613	15,870	7,690	28,220	11,220	47,970	23,385	5.80
SF070BR0	7.000	8.500	7.555	8.113	17,070	8,010	30,330	11,770	54,300	25,700	6.40
SF075BR0	7.500	9.000	8.055	8.610	17,870	8,200	31,740	12,130	61,010	28,085	6.80
SF080BR0	8.000	9.500	8.555	9.110	19,060	8,510	33,860	12,670	68,110	30,545	7.00
SF090BR0	9.000	10.500	9.555	10.108	21,430	9,110	38,090	13,700	83,465	35,665	7.80
SF100BR0	10.000	11.500	10.555	11.106	23,430	9,570	41,620	14,530	100,370	41,060	8.60
SF110BR0	11.000	12.500	11.555	12.106	25,800	10,110	45,850	15,500	118,825	46,715	9.60
SF120BR0	12.000	13.500	12.555	13.104	27,780	10,530	49,380	16,290	138,830	52,630	10.40
SF140BR0	14.000	15.500	14.555	15.102	32,150	11,440	57,140	17,950	183,525	65,205	12.00
SF160BR0	16.000	17.500	16.555	17.098	36,530	12,290	64,890	19,540	234,470	78,725	14.20
SF180BR0	18.000	19.500	18.555	19.096	41,290	13,170	73,360	21,210	291,690	93,130	15.80
SF200BR0	20.000	21.500	20.555	21.092	45,660	13,910	81,120	22,680	355,215	108,365	17.80
SF250BR0	25.000	26.500	25.555	26.085	56,380	15,570	100,200	26,100	541,745	149,725	21.80
SF300BR0	30.000	31.500	30.555	31.075	67,500	17,110	119,900	29,430	768,185	195,050	26.00
SF350BR0	35.000	36.500	35.555	36.064	78,610	18,490	139,700	32,580	1,034,910	243,450	30.20

Brass; one piece pocket separator standard

1/2" balls

Load capacities are not additive
The maximum shaft or housing fillet radius that the bearing corners will clear for this series is 0.080"
Race Width Tolerance: +0.000 -0.010"

SG SERIES 1" x 1"
SILVERTHIN PART NUMBER	DIMENSION IN INCHES				CAPACITIES IN POUNDS / IN-LBS						APPROX WEIGHT POUNDS
	BORE	OUTSIDE DIA	LAND DIA	LAND DIA	RADIAL		THRUST		MOMENT
	B	D	L₁	L₃	STATIC	DYN	STATIC	DYN	STATIC	DYN
SG040BR0	4.000	6.000	4.742	5.491	15,400	10,200	27,360	13,630	36,840	24,260	7.20
SG042BR0	4.250	6.250	4.992	5.741	16,160	10,460	28,730	14,090	40,115	25,855	7.60
SG045BR0	4.500	6.500	5.242	5.989	16,940	10,660	30,100	14,530	43,530	27,480	8.00
SG047BR0	4.750	6.750	5.492	6.239	17,710	10,960	31,460	14,970	47,085	29,135	8.20
SG050BR0	5.000	7.000	5.742	6.489	18,470	11,200	32,830	15,400	50,770	30,820	8.60
SG055BR0	5.500	7.500	6.242	6.989	20,020	11,680	35,570	16,240	58,560	34,280	9.40
SG060BR0	6.000	8.000	6.742	7.489	21,560	12,150	38,300	17,060	66,895	37,850	10.20
SG065BR0	6.500	8.500	7.242	7.987	23,100	12,610	41,040	17,870	75,775	41,535	10.80
SG070BR0	7.000	9.000	7.742	8.487	24,630	13,050	43,780	18,650	85,205	45,330	11.60
SG075BR0	7.500	9.500	8.242	8.987	26,170	13,490	46,510	19,420	95,185	49,235	12.20
SG080BR0	8.000	10.000	8.742	9.485	27,720	13,910	49,250	20,180	105,705	53,250	13.00
SG090BR0	9.000	11.000	9.742	10.485	30,810	14,740	54,720	21,640	128,395	61,600	14.40
SG100BR0	10.000	12.000	10.742	11.483	33,880	15,530	60,190	23,060	153,275	70,365	15.80
SG110BR0	11.000	13.000	11.742	12.481	36,960	16,290	65,660	24,440	180,340	79,535	17.20
SG120BR0	12.000	14.000	12.742	13.481	40,040	17,030	71,140	25,780	209,595	89,105	18.60
SG140BR0	14.000	16.000	14.742	15.478	46,190	18,420	82,080	28,360	274,675	109,375	21.60
SG160BR0	16.000	18.000	16.742	17.474	52,350	19,720	93,020	30,830	348,505	131,090	24.60
SG180BR0	18.000	20.000	18.742	19.472	58,530	20,960	104,000	33,200	431,095	154,150	27.40
SG200BR0	20.000	22.000	20.742	21.468	64,690	22,110	114,900	35,490	522,435	178,475	31.60
SG250BR0	25.000	27.000	25.742	26.461	80,080	24,760	142,300	40,920	789,100	244,180	39.00
SG300BR0	30.000	32.000	30.742	31.451	95,480	27,110	169,600	46,020	1,110,480	315,755	46.60
SG350BR0	35.000	37.000	35.742	36.440	110,890	29,210	197,000	50,840	1,486,580	391,770	54.20

Inch Duplex Type B Thin Section Bearings

SAA SERIES 3/16" x 3/16"

SA SERIES 1/4" x 1/4"

SB SERIES 5/16" x 5/16"

SC SERIES 3/8" x 3/8"

SD SERIES 1/2" x 1/2"

SF SERIES 3/4" x 3/4"

SG SERIES 1" x 1"

Part Number Cross Reference

OUR SERVICES

SCHEDULE TIME WITH OUR APPLICATION ENGINEERS

SILVERTHIN TECHNICAL DATA SHEET GENERATOR