Products
Thin Section Bearings

Silverthin JSHA10XL0 1 in Sealed Type X Thin Section Bearing

Request Quote

Specifications

Bore (B) 1.000 in
Outside Diameter (D) 1.375 in
Width 1/4"
Land Diameter (L1) 1.140 in
Land Diameter (L2) 1.235 in
Approximate Weight 0.03 lbs
Separator Nylon; one piece snapover separator
Precision Class ABEC Class 1
Bearing Type 4-Point Contact (Type X)
Seals, Shields Buna N Rubber Seal
Unit System Inch
Nylon; one piece snapover separator
3/32" balls
  1. Load capacities are not additive
  2. The maximum shaft or housing fillet radius that the bearing corners will clear for this series is 0.015"
  3. Race Width Tolerance: +0.000 -0.005"

Load Capacities

Static Radial Load 290 lbf
Dynamic Radial Load 245 lbf
Static Thrust Load 730 lbf
Dynamic Thrust Load 370 lbf
Static Moment Load 170 in-lbs
Dynamic Moment Load 110 in-lbs

Also Available

Open Angular Contact SAA10AG0
Open Radial Contact SAA10CL0
Open 4-Point Contact SAA10XL0
Sealed Radial Contact 1 JSHA10CL0
Open Duplexed (Back-to-Back) SAA10BG0
Open Duplexed (Face-to-Face) SAA10FG0
  1. Larger width than SAA to accommodate a seal

Interchange

Silverthin JSHA10XLO
Kaydon JHA10XL0
Kaydon JHA10XLO
INA CSXU0102RS
SKF FPXH1002RS1
NSK NBX02506DD
SSB RJHA10XL0
datasheet

SILVERTHIN TECHNICAL DATA SHEET GENERATOR

Streamline your bearing selection process with Silverthin's easy-to-use data sheet generator, providing you with all the information you need to make an informed decision.

Request access to the datasheet is available through authorized Silverthin Distributors, or by contacting Silverthin directly.

Data Sheet Generator

close