Products
Thin Section Bearings

Silverthin JSB040CP0 4 in Sealed Type C Thin Section Bearing

Request Quote

Specifications

Bore (B) 4.000 in
Outside Diameter (D) 4.625 in
Width 5/16"
Land Diameter (L1) 4.231 in
Land Diameter (L2) 4.393 in
Approximate Weight 0.30 lbs
Separator Brass; snapover separator
Precision Class ABEC Class 1
Bearing Type Radial Contact (Type C)
Seals, Shields Buna N Rubber Seal
Unit System Inch
Brass; snapover separator
5/32" balls
  1. Load capacities are not additive
  2. The maximum shaft or housing fillet radius that the bearing corners will clear for this series is 0.040"
  3. Race Width Tolerance: +0.000 -0.005"

Load Capacities

Static Radial Load 1,750 lbf
Dynamic Radial Load 825 lbf
Torque Max No Load 20 in-lbs

Also Available

Open Angular Contact SB040AR0
Open Radial Contact SB040CP0
Open 4-Point Contact SB040XP0
Sealed 4-Point Contact JSB040XP0
Open Duplexed (Back-to-Back) SB040BR0
Open Duplexed (Face-to-Face) SB040FR0

Interchange

Silverthin JSB040CPO
Kaydon JB040CP0
Kaydon JB040CPO
INA CSCB0402RS
SKF FPCB4002RS1
FAG L10RA4002RSD
NSK NBC10107DD
NTN KRB101LL
SSB RJB040CP0
datasheet

SILVERTHIN TECHNICAL DATA SHEET GENERATOR

Streamline your bearing selection process with Silverthin's easy-to-use data sheet generator, providing you with all the information you need to make an informed decision.

Request access to the datasheet is available through authorized Silverthin Distributors, or by contacting Silverthin directly.

Data Sheet Generator

close