SG120 Bearing 1in x 1in Thin Section Bearing
|
Type A
Angular Contact
|
Type C
Radial Contact
|
Type X
Four-Point Contact
|
| SILVER THIN PART NO. & RFQ |
DIMENSION IN INCHES | CAPACITIES IN POUNDS | Appx Weight Pounds |
|||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Bore B |
Outside Diam. D |
Land Diam. L1 |
Land Diam. L2 |
C' Bore Diam. L3 |
TYPE A | TYPE C & X | TYPE X | |||||||||
| Radial | Thrust | Radial | Thrust | Moment (Lbs-in) |
||||||||||||
| Static | Dyn | Static | Dyn | Static | Dyn | Static | Dyn | Static | Dyn | |||||||
| SG120 | 12.000 | 14.000 | 12.742 | 13.258 | 13.481 | 24,640 | 8,933 | 71,147 | 25,788 | 21,347 | 8,513 | 53,355 | 21,283 | 138,706 | 55,334 | 9.3 |
|
1. For application load information contact Mechatronics engineering.
|
2. The maximum shaft or housing fillet radius that the bearing corners will clear for this series is .080.
|
3. Bearing width tolerance +.000-.005, over 12"; Bore +.000 - .010
|
||||||||||||||||||||
