SG110 Bearing 1in x 1in Thin Section Bearing
Type A
Angular Contact |
Type C
Radial Contact |
Type X
Four-Point Contact |
SILVER THIN PART NO. & RFQ |
DIMENSION IN INCHES | CAPACITIES IN POUNDS | Appx Weight Pounds |
|||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Bore B |
Outside Diam. D |
Land Diam. L1 |
Land Diam. L2 |
C' Bore Diam. L3 |
TYPE A | TYPE C & X | TYPE X | |||||||||
Radial | Thrust | Radial | Thrust | Moment (Lbs-in) |
||||||||||||
Static | Dyn | Static | Dyn | Static | Dyn | Static | Dyn | Static | Dyn | |||||||
SG110 | 11.000 | 13.000 | 11.742 | 12.258 | 12.481 | 22,753 | 8,473 | 65,664 | 24,445 | 19,704 | 8,078 | 49,255 | 20,180 | 118,202 | 48,423 | 8.6 |
1. For application load information contact Mechatronics engineering.
|
2. The maximum shaft or housing fillet radius that the bearing corners will clear for this series is .080.
|
3. Bearing width tolerance +.000-.005, over 12"; Bore +.000 - .010
|