Products
Thin Section Bearings

Silverthin JSU065CP0 6.5 in Sealed Type C Thin Section Bearing

Request Quote

Specifications

Bore (B) 6.500 in
Outside Diameter (D) 7.250 in
Width 1/2"
Land Diameter (L1) 6.777 in
Land Diameter (L2) 6.973 in
Approximate Weight 0.87 lbs
Separator Brass; snapover separator
Precision Class ABEC Class 1
Bearing Type Radial Contact (Type C)
Seals, Shields Buna N Rubber Seal
Unit System Inch
Brass; snapover separator
3/16" balls
  1. Load capacities are not additive
  2. The maximum shaft or housing fillet radius that the bearing corners will clear for this series is 0.040"
  3. Race Width Tolerance: +0.000 -0.005"

Load Capacities

Static Radial Load 3,311 lbf
Dynamic Radial Load 1,395 lbf
Torque Max No Load 7 in-lbs

Interchange

datasheet

SILVERTHIN TECHNICAL DATA SHEET GENERATOR

Streamline your bearing selection process with Silverthin's easy-to-use data sheet generator, providing you with all the information you need to make an informed decision.

Request access to the datasheet is available through authorized Silverthin Distributors, or by contacting Silverthin directly.

Data Sheet Generator

close