Products
Thin Section Bearings

Silverthin SG055FR0 5.5 in Duplex Type F Thin Section Bearing

Request Quote

Specifications

Bore (B) 5.500 in
Outside Diameter (D) 7.500 in
Width 1"
Land Diameter (L1) 6.242 in
Land Diameter (L2) 6.758 in
Approximate Weight 9.40 lbs
Separator Brass; one piece pocket separator
Precision Class ABEC Class 1
Bearing Type Duplexed (Face-to-Face) (Type F)
Seals, Shields None (Open)
Unit System Inch
Brass; one piece pocket separator
1/2" balls
  1. Load capacities are not additive
  2. The maximum shaft or housing fillet radius that the bearing corners will clear for this series is 0.080"
  3. Race Width Tolerance: +0.000 -0.010"

Load Capacities

Static Radial Load 20,020 lbf
Dynamic Radial Load 11,680 lbf
Static Thrust Load 35,570 lbf
Dynamic Thrust Load 16,240 lbf
Static Moment Load 33,915 in-lbs
Dynamic Moment Load 20,420 in-lbs

Also Available

Open Angular Contact SG055AR0
Open Radial Contact SG055CP0
Open 4-Point Contact SG055XP0
Open Duplexed (Back-to-Back) SG055BR0

Interchange

Silverthin SG055FRO
datasheet

SILVERTHIN TECHNICAL DATA SHEET GENERATOR

Streamline your bearing selection process with Silverthin's easy-to-use data sheet generator, providing you with all the information you need to make an informed decision.

Request access to the datasheet is available through authorized Silverthin Distributors, or by contacting Silverthin directly.

Data Sheet Generator

close