SG250 Bearing 1in x 1in Thin Section Bearing
|
Type A
Angular Contact
|
Type C
Radial Contact
|
Type X
Four-Point Contact
|
| SILVER THIN PART NO. & RFQ |
DIMENSION IN INCHES | CAPACITIES IN POUNDS | Appx Weight Pounds |
|||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Bore B |
Outside Diam. D |
Land Diam. L1 |
Land Diam. L2 |
C' Bore Diam. L3 |
TYPE A | TYPE C & X | TYPE X | |||||||||
| Radial | Thrust | Radial | Thrust | Moment (Lbs-in) |
||||||||||||
| Static | Dyn | Static | Dyn | Static | Dyn | Static | Dyn | Static | Dyn | |||||||
| SG250 | 25.000 | 27.000 | 25.742 | 26.258 | 26.461 | 49,282 | 14,181 | 142,302 | 40,921 | 42,683 | 13,512 | 106,702 | 33,781 | 554,904 | 175,702 | 19.5 |
|
1. For application load information contact Mechatronics engineering.
|
2. The maximum shaft or housing fillet radius that the bearing corners will clear for this series is .080.
|
3. Bearing width tolerance +.000-.005, over 12"; Bore +.000 - .010
|
||||||||||||||||||||
