SD250 Bearing 1/2in x 1/2in Thin Section Bearing
Type A
Angular Contact |
Type C
Radial Contact |
Type X
Four-Point Contact |
SILVER THIN PART NO. & RFQ |
DIMENSION IN INCHES | CAPACITIES IN POUNDS | Appx Weight Pounds |
|||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Bore B |
Outside Diam. D |
Land Diam. L1 |
Land Diam. L2 |
C' Bore Diam. L3 |
TYPE A | TYPE C & X | TYPE X | |||||||||
Radial | Thrust | Radial | Thrust | Moment (Lbs-in) |
||||||||||||
Static | Dyn | Static | Dyn | Static | Dyn | Static | Dyn | Static | Dyn | |||||||
SD250 | 25.000 | 26.000 | 25.370 | 25.630 | 25.688 | 20,143 | 4,692 | 58,144 | 13,543 | 17,442 | 4,472 | 43,612 | 11,181 | 222,401 | 57,013 | 4.79 |
1. For application load information contact Mechatronics engineering.
|
2. The maximum shaft or housing fillet radius that the bearing corners will clear for this series is .060.
|
3. Bearing width tolerance +.000-.005, over 12"; Bore +.000 - .010
|