SD180 Bearing 1/2in x 1/2in Thin Section Bearing
Type A
Angular Contact |
Type C
Radial Contact |
Type X
Four-Point Contact |
SILVER THIN PART NO. & RFQ |
DIMENSION IN INCHES | CAPACITIES IN POUNDS | Appx Weight Pounds |
|||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Bore B |
Outside Diam. D |
Land Diam. L1 |
Land Diam. L2 |
C' Bore Diam. L3 |
TYPE A | TYPE C & X | TYPE X | |||||||||
Radial | Thrust | Radial | Thrust | Moment (Lbs-in) |
||||||||||||
Static | Dyn | Static | Dyn | Static | Dyn | Static | Dyn | Static | Dyn | |||||||
SD180 | 18.000 | 19.000 | 18.370 | 18.630 | 18.712 | 14,612 | 3,792 | 42,181 | 10,934 | 12,653 | 3,612 | 31,642 | 9,031 | 117,003 | 33,401 | 3.48 |
1. For application load information contact Mechatronics engineering.
|
2. The maximum shaft or housing fillet radius that the bearing corners will clear for this series is .060.
|
3. Bearing width tolerance +.000-.005, over 12"; Bore +.000 - .010
|