SD100 Bearing 1/2in x 1/2in Thin Section Bearing
|
Type A
Angular Contact
|
Type C
Radial Contact
|
Type X
Four-Point Contact
|
| SILVER THIN PART NO. & RFQ |
DIMENSION IN INCHES | CAPACITIES IN POUNDS | Appx Weight Pounds |
|||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Bore B |
Outside Diam. D |
Land Diam. L1 |
Land Diam. L2 |
C' Bore Diam. L3 |
TYPE A | TYPE C & X | TYPE X | |||||||||
| Radial | Thrust | Radial | Thrust | Moment (Lbs-in) |
||||||||||||
| Static | Dyn | Static | Dyn | Static | Dyn | Static | Dyn | Static | Dyn | |||||||
| SD100 | 10.000 | 11.000 | 10.370 | 10.630 | 10.732 | 8,299 | 2,603 | 23,947 | 7,500 | 7,183 | 2,478 | 17,963 | 6,196 | 37,710 | 12,995 | 1.88 |
|
1. For application load information contact Mechatronics engineering.
|
2. The maximum shaft or housing fillet radius that the bearing corners will clear for this series is .060.
|
3. Bearing width tolerance +.000-.005, over 12"; Bore +.000 - .010
|
||||||||||||||||||||
