SD070 Bearing 1/2in x 1/2in Thin Section Bearing
|
Type A
Angular Contact
|
Type C
Radial Contact
|
Type X
Four-Point Contact
|
| SILVER THIN PART NO. & RFQ |
DIMENSION IN INCHES | CAPACITIES IN POUNDS | Appx Weight Pounds |
|||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Bore B |
Outside Diam. D |
Land Diam. L1 |
Land Diam. L2 |
C' Bore Diam. L3 |
TYPE A | TYPE C & X | TYPE X | |||||||||
| Radial | Thrust | Radial | Thrust | Moment (Lbs-in) |
||||||||||||
| Static | Dyn | Static | Dyn | Static | Dyn | Static | Dyn | Static | Dyn | |||||||
| SD070 | 7.000 | 8.000 | 7.370 | 7.630 | 7.736 | 5,929 | 2,077 | 17,104 | 5,996 | 5,131 | 1,980 | 12,832 | 4,946 | 19,249 | 7,421 | 1.31 |
|
1. For application load information contact Mechatronics engineering.
|
2. The maximum shaft or housing fillet radius that the bearing corners will clear for this series is .060.
|
3. Bearing width tolerance +.000-.005, over 12"; Bore +.000 - .010
|
||||||||||||||||||||
