SA100 Bearing 1/4in x 1/4in Thin Section Bearing
Type A
Angular Contact |
Type C
Radial Contact |
Type X
Four-Point Contact |
SILVER THIN PART NO. & RFQ |
DIMENSION IN INCHES | CAPACITIES IN POUNDS | Appx Weight Pounds |
|||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Bore B |
Outside Diam. D |
Land Diam. L1 |
LAND DIAM. L2 |
C' Bore Diam. L3 |
TYPE A | TYPE C & X | TYPE X | |||||||||
Radial | Thrust | Radial | Thrust | Moment (Lbs-in) |
||||||||||||
Static | Dyn | Static | Dyn | Static | Dyn | Static | Dyn | Static | Dyn | |||||||
SA100 | 10.000 | 10.500 | 10.186 | 10.314 | 10.355 | 3,595 | 914 | 10,376 | 2,644 | 3,118 | 878 | 7,789 | 2,183 | 15,948 | 4,472 | 0.50 |
1. For application load information contact Mechatronics engineering.
|
2. The maximum shaft or housing fillet radius that the bearing corners will clear for this series is .025.
|
3. Bearing width tolerance +.000-.005
|