Skip Navigation
866.294.5841

SP590705-14 SP590705-14

Request a Quote
SP590705-14
Photograph of Pinions

Silverthin™ is pleased to offer standard, high quality mating pinions from stock for our ST and SK series slewing ring bearings. These pinions are made to AISI 4140 steel and are hardened to have a surface hardness of 55-60 HRC. See below for dimensional data.

Dimension codes for pinions
GEAR DATA (α = 20°) OUTLINE DIMENSIONS AND WEIGHT
TOOTH
FORM
z1 Pd
(in)
b1
(in)
L1
(in)
D1
(in)
Do1
(in)
Dr1
(in)
Di1
(in)
w
(in)
G
Approx
(lbs)
BEARING P/N PINION P/N
SP590705-14STE-590 thru STE-705SD14322.884.6675.23.881.255/1611.4
Tolerances Ref. +/-0.015 +/-0.015 Ref. +.000/-
.010
Ref. +0.002/-
.000

Pinion/Gear Backlash

Backlash, sometimes referred to as play, is the amount of clearance between mating gears. (See Figure Below). For our purposes, the backlash would be between the slewing ring gear and mating pinion. This feature is often controlled by the center distance between the slewing ring and pinion, which can be either fixed or adjustable depending on the demands of the application. See typical backlash ranges table.

Drawing of pinion backlash
Typical Backlash Ranges
Gear
Pitch Dia,
D2 (in.)
Min
Backlash,
J (in.)
Maximum Backlash(in.)
Diametral Pitch (Pd)
1.5 1.75 2 2.5 3,4,5
20 0.014 0.029 0.027 0.025 0.023 0.022
30 0.015 0.030 0.028 0.026 0.024 0.023
40 0.016 0.031 0.029 0.027 0.025 0.024
60 0.018 0.033 0.031 0.029 0.027 0.026
80 0.020 0.035 0.033 0.031 0.029 0.028
100 0.022 0.037 0.035 0.033 0.03 0.030
120 0.024 0.039 0.037 0.035 0.033 0.032
Silverthin Bearing Group of Mechatronics, Inc.
Toll Free 866.294.5841 • Fax 425.222.7535 • email sales@silverthin.com
New Media Consulting logo