Products
Thin Section Bearings

Silverthin SAA17AG0 1.75 in Open Type A Thin Section Bearing

Request Quote

Specifications

Bore (B) 1.750 in
Outside Diameter (D) 2.125 in
Width 3/16"
Land Diameter (L1) 1.890 in
Land Diameter (L2) 1.985 in
Land Diameter (L3) 1.990 in
Approximate Weight 0.04 lbs
Separator Nylon; circular pocket separator
Precision Class ABEC Class 1
Bearing Type Angular Contact (Type A)
Seals, Shields None (Open)
Unit System Inch
Nylon; circular pocket separator
3/32" balls
  1. Load capacities are not additive
  2. The maximum shaft or housing fillet radius that the bearing corners will clear for this series is 0.015"
  3. Race Width Tolerance: +0.000 -0.005"

Load Capacities

Static Radial Load 530 lbf
Dynamic Radial Load 250 lbf
Static Thrust Load 1,520 lbf
Dynamic Thrust Load 600 lbf

Also Available

Open Radial Contact SAA17CL0
Open 4-Point Contact SAA17XL0
Sealed Radial Contact 1 JSHA17CL0
Sealed 4-Point Contact 1 JSHA17XL0
Open Duplexed (Back-to-Back) SAA17BG0
Open Duplexed (Face-to-Face) SAA17FG0
  1. Larger width than SAA to accommodate a seal

Interchange

Silverthin SAA17AGO
Kaydon KAA17AG0
Kaydon KAA17AGO
INA CSEAA017
SKF FPAB112
FAG L15PA112
NSK NBA4404
NTN KYS017
SSB RAA17AG0
RBC KAA17AG0*RBC
datasheet

SILVERTHIN TECHNICAL DATA SHEET GENERATOR

Streamline your bearing selection process with Silverthin's easy-to-use data sheet generator, providing you with all the information you need to make an informed decision.

Request access to the datasheet is available through authorized Silverthin Distributors, or by contacting Silverthin directly.

Data Sheet Generator

close