Products
Thin Section Bearings

Silverthin SAA15AG0 1.5 in Open Type A Thin Section Bearing

Request Quote

Specifications

Bore (B) 1.500 in
Outside Diameter (D) 1.875 in
Width 3/16"
Land Diameter (L1) 1.640 in
Land Diameter (L2) 1.735 in
Land Diameter (L3) 1.774 in
Approximate Weight 0.04 lbs
Separator Nylon; circular pocket separator
Precision Class ABEC Class 1
Bearing Type Angular Contact (Type A)
Seals, Shields None (Open)
Unit System Inch
Nylon; circular pocket separator
3/32" balls
  1. Load capacities are not additive
  2. The maximum shaft or housing fillet radius that the bearing corners will clear for this series is 0.015"
  3. Race Width Tolerance: +0.000 -0.005"

Load Capacities

Static Radial Load 480 lbf
Dynamic Radial Load 240 lbf
Static Thrust Load 1,380 lbf
Dynamic Thrust Load 560 lbf

Also Available

Open Radial Contact SAA15CL0
Open 4-Point Contact SAA15XL0
Sealed Radial Contact 1 JSHA15CL0
Sealed 4-Point Contact 1 JSHA15XL0
Open Duplexed (Back-to-Back) SAA15BG0
Open Duplexed (Face-to-Face) SAA15FG0
  1. Larger width than SAA to accommodate a seal

Interchange

Silverthin SAA15AGO
Kaydon KAA15AG0
Kaydon KAA15AGO
INA CSEAA015
SKF FPAB108
FAG L15PA108
NSK NBA3804
NTN KYS015
SSB RAA15AG0
RBC KAA15AG0*RBC
datasheet

SILVERTHIN TECHNICAL DATA SHEET GENERATOR

Streamline your bearing selection process with Silverthin's easy-to-use data sheet generator, providing you with all the information you need to make an informed decision.

Request access to the datasheet is available through authorized Silverthin Distributors, or by contacting Silverthin directly.

Data Sheet Generator

close